① IN port: 5V/2.1A Input port
② NB port: charge notebook,car charge input/output car start port.
③ EC5 port :12V/50W Solar panel input ,12V/10A output port
④ Display screen:Display voltage, battery capacity percentage,etc.
⑤ USB 1 port: QC2.0 quick charging output
⑥ USB 2 port: 5V/2.1A output
⑦ Key: Voltage selection, on/off key
4, Key function instruction
① shortly press the button to light the display screen and turn on
the power bank
② Long press over three seconds to enter the mode of voltage
selection, voltage indication will blink,then shortly press the
button to select the appropriate voltage.
5, Instruction of abnormal code
Abnormal code of battery: when the battery is abnormal, the output
will be cut off automatically, and LCD display screen will
indicates abnormal code:
① OV overvoltage protection ②UV undervoltage protection
③ OC Overcurrent protection ④OT overtemperature protection;
6, Operation instruction:
Q: How to charge this product?
① Use the adapter charging this product(The adapter is optional)
② Use USB cable connect the laptop USB port to Micro USB input port
of the power bank, the laptop will supply power to the power bank
③ Use the car charging cable connect the Cigarette lighter port
with the NB port.
When charging , The battery symbol will blink on the LCD display
screen, the voltage automatically switch to charging power on the
LCD screen, then the battery capacity percentage will rise. After
the power bank is fully charged, the LCD display screen will
automatically switch to the initial state.
④ Recharge the power bank by solar panel
The power of the solar panel is 60W(Max).no-load voltage 14V-20V
⑤ Use the adapter charge this product
The adapter output 13V-20V/3A
② Charge the notebook by NB port: Select the appropriate notebook
connector. Connect the power bank and laptop according to the below
graphic.Long press the button more than three seconds enter into
the voltage selection mode, the voltage display blinking, shortly
press the button select the voltage according to the laptop adapter
③ How to charge and discharging for 12V products.
A: Connect the EC5 output port with the 12v car equipments to
charge and discharging . fit for high-power product and the current
B: Connect with the NB port , and set the voltage to 12v to charge
Q: How to turn off the power bank?
A: The product has the function of intelligent detection,If without
overload or the product charged fully,the product will go into a
standby sleep mode saving battery power.
7, Product instruction
① When QC2.0 quick charge output is working,USB 1 port will be off
② When the power bank recharge by NB port(high current quick
charge),the capacity maybe decrease 1%-2%.
③ When the power bank recharge by car, it maybe can’t be fully
charged to 100% because input voltage is not enough.
④ When without overload or the power bank is not connected to
electronic devices,LCD screen will display the setting voltage of
NB port;when with overload or the power bank is working,LCD screen
will display charging power or discharge power(discharge power is
⑤ When the power bank is charging,charge symbol will display on the
LCD display screen;when charging stop,charge symbol will disappear
automatically about after 3 seconds.
⑥ Digit % display means the remain capacity .
⑦ NB output power 80W (Max).and continue working output power is
① Do not use the product in a closed environment, as it may cause
the product become hot and reduce product's life due to poor heat
dissipation, which also may cause damage, and even cause other
dangers such as smoke and fire.
② If any abnormalities such as odor, hotness, discoloration,
deformation, or liquid leakage are found during the use of this
product, please stop using it immediately; If the battery's liquid
accidentally falls on the skin, please immediately rinse with tap
water and seek medical treatment in time.
③ Please don’t dismantle the product.
④ Prohibit storing or using the product in high humidity
environment.(Operation temperature range please refer to product
⑤ Please don’t bump or throw the product violently.
⑥ Prohibit putting the product in fire or water to avoid firing or
⑦ When not using the product, please remove the input power cable,
it belongs "button control port output" product, and the product's
output port must be closed in time.
⑧ Prohibit using metal or other conductors to connect input or
output to avoid short circuit.
⑨ Please use original cable, connector, adapter and other.
accessories to avoid abnormal events.
⑩ Please don’t let children use the product in the case of
9, Capacity storage instruction
It is highly recommended that the power bank P180 be fully charged
before being stored for an extended period of time.
Because the power bank if capacity in 0%,and more than 1-2 weeks no
recharge it,the power bank inside cells will exist the risk of over
discharged,so in case of this problem happen,pls remember recharge
the power bank when capacity less than 10%.
How to solve the problem after the power bank inside batteries over
Pls try to use AC DC adapter(5V 2A/ or QC3.0/QC2.0 fast charger ac
dc adapter)connect with the P180-micro usb input port recharge the
power bank,after 2-5 minutes,if you see the LCD display show the
working power(W),means the power bank was recharged,and can work
again.If charge after 2-5 minutes,the LCD display still without
working power (W),means the power banks inside batteries were over
10, Packing list
① power bank *1 piece
② Computer cable+notebook connectors*1 set(8pcs)
③ Car charging cable*1 piece
④ USB cable*1 piece
⑤ Manual &Warranty Card *1 piece
⑥ Cigarette lighter*1 piece
⑦ Adapter *1 piece